Tag Archives: motor reduction gear

China Bwd4 High Torque Long Life Cycloid Planetary Shaft Reduction Gearbox Xwd5 Cycloidal Reducer Planetary Gearbox with Motor planetary gears gear ratio

Merchandise Description

Bwd4 Large Torque Extended Life Cycloid Planetary Shaft Reduction Gearbox Xwd5 Cycloidal Reducer Planetary Gearbox with Motor

Quick Particulars:

Variety: XB sequence Cycloidal Pin Wheel Velocity Reducer    

Input Speed: a thousand-1500rmp   

Output Pace: .3-280rpm

Certification: ISO9001 CE          

Ex Electricity:.09-132KW                  

Warranty: 1Years


/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample


/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

The Advantages of Using a Cyclone Gearbox

Using a cycloidal gearbox to drive an input shaft is a very effective way to reduce the speed of a machine. It does this by reducing the speed of the input shaft by a predetermined ratio. It is capable of very high ratios in relatively small sizes.helical gearbox

Transmission ratio

Whether you’re building a marine propulsion system or a pump for the oil and gas industry, there are certain advantages to using cycloidal gearboxes. Compared to other gearbox types, they’re shorter and have better torque density. These gearboxes also offer the best weight and positioning accuracy.
The basic design of a cycloidal gearbox is similar to that of a planetary gearbox. The main difference is in the profile of the gear teeth.
Cycloid gears have less tooth flank wear and lower Hertzian contact stress. They also have lower friction and torsional stiffness. These advantages make them ideal for applications that involve heavy loads or high-speed drives. They’re also good for high gear ratios.
In a cycloidal gearbox, the input shaft drives an eccentric bearing, while the output shaft drives the cycloidal disc. The cycloidal disc rotates around a fixed ring, and the pins of the ring gear engage the holes in the disc. The pins then drive the output shaft as the disc rotates.
Cycloid gears are ideal for applications that require high gear ratios and low friction. They’re also good for applications that require high torsional stiffness and shock load resistance. They’re also suitable for applications that require a compact design and low backlash.
The transmission ratio of a cycloidal gearbox is determined by the number of lobes on the cycloidal disc. The n=n design of the cycloidal disc moves one lobe per revolution of the input shaft.
Cycloid gears can be manufactured to reduce the gear ratio from 30:1 to 300:1. These gears are suitable for high-end applications, especially in the automation industry. They also offer the best positioning accuracy and backlash. However, they require special manufacturing processes and require non-standard characteristics.

Compressive force

Compared with conventional gearboxes, the cycloidal gearbox has a unique set of kinematics. It has an eccentric bearing in a rotating frame, which drives the cycloidal disc. It is characterized by low backlash and torsional stiffness, which enables geared motion.
In this study, the effects of design parameters were investigated to develop the optimal design of a cycloidal reducer. Three main rolling nodes were studied: a cycloidal disc, an outer race and the input shaft. These were used to analyze the motion related dynamic forces, which can be used to calculate stresses and strains. The gear mesh frequency was calculated using a formula, which incorporated a correction factor for the rotating frame of the outer race.
A three-dimensional finite element analysis (FEA) study was conducted to evaluate the cycloidal disc. The effects of the size of the holes on the disc’s induced stresses were investigated. The study also looked at the torque ripple of a cycloidal drive.
The authors of this study also explored backlash distribution in the output mechanism, which took into account the machining deviations and structure and geometry of the output mechanism. The study also looked at the relative efficiency of a cycloidal reducer, which was based on a single disc cycloidal reducer with a one-tooth difference.
The authors of this study were able to deduce the contact stress of the cycloidal disc, which is calculated using the material-based contact stiffness. This can be used to determine accurate contact stresses in a cycloidal gearbox.
It is important to know the ratios needed for calculation of the bearing rate. This can be calculated using the formula f = k (S x R) where S is the volume of the element, R is the mass, k is the contact stiffness and f is the force vector.helical gearbox

Rotational direction

Unlike the conventional ring gear which has a single axis of rotation, cycloidal gearbox has three rotational axes which are parallel and are located in a single plane. A cycloidal gearbox has excellent torsional stiffness and shock load capacity. It also ensures constant angular velocity, and is used in high-speed gearbox applications.
A cycloidal gearbox consists of an input shaft, a drive member and a cycloidal disc. The disc rotates in one direction, while the input shaft rotates in the opposite direction. The input shaft eccentrically mounts to the drive member. The cycloidal disc meshes with the ring-gear housing, and the rotational motion of the cycloidal disc is transferred to the output shaft.
To calculate the rotational direction of a cycloidal gearbox, the cycloid must have the correct angular orientation and the centerline of the cycloid should be aligned with the center of the output hole. The cycloid’s shortest length should be equal to the radius of the pin circle. The cycloid’s largest radius should be the size of the bearing’s exterior diameter.
A single-stage gear will not have much space to work with, so you’ll need a multistage gear to maximize space. This is also the reason that cycloid gears are usually designed with a shortened cycloid.
To calculate the most efficient tooth profile for a cycloidal gear, a new method was devised. This method uses a mathematical model that uses the cycloid’s rotational direction and a few other geometric parameters. Using a piecewise function related to the distribution of pressure angle, the cycloid’s most efficient profile is determined. It is then superimposed on the theoretical profile. The new method is much more flexible than the conventional method, and can adapt to changing trends of the cycloidal profile.

Design

Several designs of cycloidal gearboxes have been developed. These gearboxes have a large reduction ratio in one stage. They are mainly used for heavy machines. They provide good torsional stiffness and shock load capacity. However, they also have vibrations at high RPM. Several studies have been conducted to find a solution to this problem.
A cycloidal gearbox is designed by calculating the reduction ratio of a mechanism. This ratio is obtained by the size of the input speed. This is then multiplied by the reduction ratio of the gear profile.
The most important factor in the design of a cycloidal gearbox is the load distribution along the width of the gear. Using this as a design criterion, the amplitude of vibration can be reduced. This will ensure that the gearbox is working properly. In order to generate proper mating conditions, the trochoidal profile on the cycloidal disc periphery must be defined accurately.
One of the most common forms of cycloidal gears is circular arc toothing. This is the most common type of toothing used today.
Another form of gear is the hypocycloid. This form requires the rolling circle diameter to be equal to half the base circle diameter. Another special case is the point tooth form. This form is also called clock toothing.
In order to make this gear profile work, the initial point of contact must remain fixed to the edge of the rolling disk. This will generate the hypocycloid curve. The curve is traced from this initial point.
To investigate this gear profile, the authors used a 3D finite element analysis. They used the mathematical model of gear manufacturing that included kinematics parameters, output moment calculations, and machining steps. The resulting design eliminated backlash.helical gearbox

Sizing and selection

Choosing a gearbox can be a complex task. There are many factors that need to be taken into account. You need to determine the type of application, the required speed, the load, and the ratio of the gearbox. By gaining this information, you can find a solution that works best for you.
The first thing you need to do is find the proper size. There are several sizing programs available to help you determine the best gearbox for your application. You can start by drawing a cycloidal gear to help you create the part.
During sizing, it is important to consider the environment. Shock loads, environmental conditions, and ambient temperatures can increase wear on the gear teeth. The temperature also has a significant impact on lubrication viscosities and seal materials.
You also need to consider the input and output speed. This is because the input speed will change your gearbox ratio calculations. If you exceed the input speed, you can damage the seals and cause premature wear on the shaft bearings.
Another important aspect of sizing is the service factor. This factor determines the amount of torque the gearbox can handle. The service factor can be as low as 1.4, which is sufficient for most industrial applications. However, high shock loads and impact loads will require higher service factors. Failure to account for these factors can lead to broken shafts and damaged bearings.
The output style is also important. You need to determine if you want a keyless or keyed hollow bore, as well as if you need an output flange. If you choose a keyless hollow bore, you will need to select a seal material that can withstand the higher temperatures.
China Bwd4 High Torque Long Life Cycloid Planetary Shaft Reduction Gearbox Xwd5 Cycloidal Reducer Planetary Gearbox with Motor     planetary gears gear ratioChina Bwd4 High Torque Long Life Cycloid Planetary Shaft Reduction Gearbox Xwd5 Cycloidal Reducer Planetary Gearbox with Motor     planetary gears gear ratio
editor by CX 2023-03-30

China Bwed Double Reduction Horizontal Cycloidal Gear Gearbox with Motor cycloidal gearbox manufacturers

Merchandise Description

XWD2/ XWD3/XWD4/XWD5/XWD6/XWD7 /XWD8 gearbox with ac motor 

Cycloidal reducer adopts meshing cycloid pin equipment, planetary transmission principle, so normally also known as planetary cycloid reducer.  Planetary cycloidal reducer can be commonly utilised in petroleum, environmental protection, chemical, cement, transportation, textile, pharmaceutical, foods, printing, lifting, mining, metallurgy, design, electricity generation and other industries.
      As a drive or reduction equipment,  the machine is divided into horizontal, vertical, biaxial and straight league assembly way,and so forth.  Its exclusive secure structure can replace normal cylindrical gear reducer and worm equipment reducer in a lot of circumstances. Therefore, planetary cycloid gear reducer is widely used in numerous industries and fields, and is typically welcomed by the majority of customers.

XWD/BWY cycloid  reducer motor details:

B sequence:

BW basedoard horizontal put in double axes type 

BL flange vertical mounted double axes sort

BWY  basedoard horizontal put in motor immediate-relationship kind

BLY   flange vertical put in motor immediate-relationship type

X sequence:

XW basedoard horizontal mounted double axes variety

XL flange vertical installed double axes type

XWD basedoard horizontal put in motor immediate-link kind

XLD flange vertical mounted motor direct-connection variety

 

 

FAQ
one, Q:what is actually your MOQ for ac gearbox motor  ?
A: 1pc is alright for every kind electric gear box  motor 

two, Q: What about your guarantee for your induction velocity reducer motor ?
A: 1 yr ,but except male-made destroyed

three, Q: which payment way you can settle for ?
A: TT, western union .

4, Q: how about your payment way ?
A: one hundred%payment in sophisticated much less $5000 ,thirty% payment in sophisticated payment , 70% payment prior to sending in excess of $5000.

five, Q: how about your packing of velocity reduction motor  ?
A: plywood case ,if dimensions is small  ,we will pack with pallet for much less 1 container 

six, Q: What information should be given, if I acquire electric helical geared motor  from you ?
A: rated power,  ratio or output speed,kind ,voltage , mounting way , quantity , if much more is far better , 
 

US $30-200
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Function: Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Customization:
US $30-200
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor, Machinery, Agricultural Machinery
Function: Speed Changing, Speed Reduction
Layout: Cycloidal
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Single-Step

###

Customization:

Cyclone Gearbox Vs Involute Gearbox

Whether you’re using a cycloidal gearbox or an involute gearbox for your application, there are a few things you should know. This article will highlight some of those things, including: cycloidal gearbox vs involute gearbox, weight, compressive force, precision, and torque density.helical gearbox

Compressive force

Several studies have been carried out to analyze the static characteristics of gears. In this article, the authors investigate the structural and kinematic principles of a cycloidal gearbox. The cycloidal gearbox is a gearbox that uses an eccentric bearing inside a rotating frame. It has no common pinion-gear pair, and is therefore ideal for a high reduction ratio.
The purpose of this paper is to investigate the stress distribution on a cycloidal disc. Various gear profiles are investigated in order to study the load distribution and dynamic effects.
Cycloidal gearboxes are subject to compression and backlash, which require the use of proper ratios for the bearing rate and the TSA. The paper also focuses on the kinematic principles of the reducer. In addition, the authors use standard analysis techniques for the shaft/gear and the cycloidal disc.
The authors previously worked on a rigid body dynamic simulation of a cycloidal reducer. The analysis used a trochoidal profile on the cycloidal disc periphery. The trochoidal profile is obtained from a manufacturing drawing and takes into account the tolerances.
The mesh density in the cycloidal disc captures the exact geometry of the parts. It provides accurate contact stresses.
The cycloidal disc consists of nine lobes, which move by one lobe per rotation of the drive shaft. However, when the disc is rotated around the pins, the cycloidal disc does not move around the center of gravity. Therefore, the cycloidal disc shares torque load with five outer rollers.
A low reduction ratio in a cycloidal gearbox results in a higher induced stress in the cycloidal disc. This is due to the bigger hole designed to reduce the material inside the disc.

Torque density

Several types of magnetic gearboxes have been studied. Some magnetic gearboxes have a higher torque density than others, but they are still not able to compete with the mechanical gearboxes.
A new high torque density cycloidal magnetic gearbox using Halbach rotors has been developed and is being tested. The design was validated by building a CPCyMG prototype. The results showed that the simulated slip torque was comparable to the experimental slip torque. The peak torque measured was a p3 = 14 spatial harmonic, and it corresponds to the active region torque density of 261.4 N*m/L.
This cycloidal gearbox also has a high gear ratio. It has been tested to achieve a peak torque of 147.8 Nm, which is more than double the torque density of the traditional cycloidal gearbox. The design incorporates a ferromagnetic back-support that provides mechanical fabrication support.
This cycloidal gearbox also shows how a small diameter can achieve a high torque density. It is designed with an axial length of 50mm. The radial deflection forces are not serious at this length. The design uses a small air gap to reduce the radial deflection forces, but it is not the only design option.
The trade-off design also has a high volumetric torque density. It has a smaller air gap and a higher mass torque density. It is feasible to make and mechanically strong. The design is also one of the most efficient in its class.
The helical gearing design is a newer technology that brings a higher level of precision to a cycloidal gearbox. It allows a servomotor to handle a heavy load at high cycle rates. It is also useful in applications that require smaller design envelopes.helical gearbox

Weight

Compared to planetary gearboxes, the weight of cycloidal gearboxes is not as significant. However, they do provide some advantages. One of the most significant features is their backlash-free operation, which helps them deliver smooth and precise movement.
In addition, they provide high efficiency, which means that servo motors can run at higher speeds. The best part is that they do not need to be stacked up in order to achieve a high ratio.
Another advantage of cycloidal gearboxes is that they are usually less expensive than planetary gearboxes. This means that they are suitable for the manufacturing industry and robotics. They are also suited for heavy-duty robots that require a robust gearbox.
They also provide a better reduction ratio. Cycloidal gears can achieve reduction ratios from 30:1 to 300:1, which is a huge improvement over planetary gears. However, there are few models available that provide a ratio below 30:1.
Cycloidal gears also offer more resistance to wear, which means that they can last longer than planetary gears. They are also more compact, which helps them achieve high ratios in a smaller space. The design of cycloidal gears also makes them less prone to backlash, which is one of the major shortcomings of planetary gearboxes.
In addition, cycloidal gears can also provide better positioning accuracy. In fact, this is one of the primary reasons for choosing cycloidal gears over planetary gears. This is because the cycloid disc rotates around a bearing independently of the input shaft.
Compared to planetary gearboxes, cycloidal gears are also much shorter. This means that they provide the best positioning accuracy. They are also 50% lighter, meaning that they have a smaller diameter.

Precision

Several experts have studied the cycloidal gearbox in precision reducers. Their research mainly focuses on the mathematical model and the method for precision evaluation of cycloidal gears.
The traditional modification design of cycloidal gears is mainly realized by setting various machining parameters and center position of the grinding wheel. But it has some disadvantages because of unstable meshing accuracy and uncontrollable tooth profile curve shape.
In this study, a new method of modification design of cycloidal gears is proposed. This method is based on the calculation of meshing backlash and pressure angle distribution. It can effectively pre-control the transmission accuracy of cycloid-pin gear. It can also ensure good meshing characteristics.
The proposed method can be applied in the manufacture of rotary vector reducers. It is also applicable in the precision reducer for robots.
The mathematical model for cycloidal gears can be established with the pressure angle a as a dependent variable. It is possible to calculate the pressure angle distribution and the profile pressure angle. It can also be expressed as DL=f(a). It can be applied in the design of precision reducers.
The study also considers the root clearance, the backlash of gear teeth and the profile angle. These factors have a direct effect on the transmission performance of cycloidal gear. It also indicates the higher motion accuracy and the smaller backlash. The modified profile can also reflect the smaller transmission error.
In addition, the proposed method is also based on the calculation of lost motion. It determines the angle of first tooth contacts. This angle is an important factor affecting the modification quality. The transmission error after the second cycloid method is the least.
Finally, a case study on the CZPT RV-35N gear pair is shown to prove the proposed method.helical gearbox

Involute gears vs cycloidal gears

Compared to involute gears, cycloidal gears have a lower noise, less friction, and last longer. However, they are more expensive. Cycloidal gears can be more difficult to manufacture. They may be less suitable for certain applications, including space manipulators and robotic joints.
The most common gear profile is the involute curve of a circle. This curve is formed by the endpoint of an imaginary taut string unwinding from the circle.
Another curve is the epicycloid curve. This curve is formed by the point rigidly attached to the circle rolling over another circle. This curve is difficult to produce and is much more expensive to produce than the involute curve.
The cycloid curve of a circle is also an example of the multi-cursor. This curve is generated by the locus of the point on the circle’s circumference.
The cycloid curve has the same diameter as the involute curve, but is tangentially curving along the circle’s diameter. This curve is also classified as ordinary. It has several other functions. The FE method was used to analyze the strain state of cycloidal speed reducers.
There are many other curves, but the involute curve is the most widely used gear profile. The involute curve of a circle is a spiraling curve traced by the endpoint of an imaginary tautstring.
Involute gears are a lot like a set of Lego blocks. They are a lot of fun to play with. They also have a lot of advantages. For example, they can handle center sifts better than cycloidal gears. They are also much easier to manufacture, so the cost of involute teeth is lower. However, they are obsolete.
Cycloidal gears are also more difficult to manufacture than involute gears. They have a convex surface, which leads to more wear. They also have a simpler shape than involute gears. They also have less teeth. They are used in rotary motions, such as in the rotors of screw compressors.
China Bwed Double Reduction Horizontal Cycloidal Gear Gearbox with Motor     cycloidal gearbox manufacturersChina Bwed Double Reduction Horizontal Cycloidal Gear Gearbox with Motor     cycloidal gearbox manufacturers
editor by czh 2022-12-15

in Krasnoyarsk Russian Federation sales price shop near me near me shop factory supplier DC Brush Brushless Reduction Precision Planetary Gear Motor manufacturer best Cost Custom Cheap wholesaler

  in Krasnoyarsk Russian Federation  sales   price   shop   near me   near me shop   factory   supplier DC Brush   Brushless Reduction Precision Planetary Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

Additionally, WE CAN Produce Custom-made VARIATORS, GEARED MOTORS, Electric powered MOTORS AND OTHER HYDRAULIC Products In accordance TO CUSTOMERS’ DRAWINGS. guarantees the balance and consistency of the key perform of elements. Total use has been manufactured of all kinds of innovative methods and technological innovation to attain excelsior producing. DC Brush (Brushless) Reduction EPT Planetary Equipment EPT

Item Description:

one. High efficiency with competitive cost
2. EPT Plastic substance
three. Broad selection velocity ration
4. Compliance with IEC stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd

1)Specifications:

Design ZWBPD571571-864
Voltage Range (V) 6.-12
Rated Voltage (V) twelve.
Free Load Pace (rpm) seven
Feee-load Recent (mA) ninety
Rated Pace (rpm) seven
Rated Current (mA) one hundred thirty
Rated Torque (mN.cm) three,116
Output EPT (W) .seven
EPT Rated Torque (g.cm) 10,000
EPT instantaneous Torque (g.cm) thirty,000
Velocity Ration 864
Total Size (mm) 58.six

Product Application Parameters Rated Torque of Gear Box Immediate Torque of Gear Box Equipment Ratio Gear Box Size
L1
Rated At No Load At Rated Load All round Length
L
Voltage Velocity Present Pace Recent Torque
VDC rpm mA rpm mA gf.cm mN.m mm gf.cm gf.cm mm
ZWBPD571571-24 12. 273 eighty 237 125 175 17.2 forty eight. ten thousand 30000 24 22.9
ZWBPD571571-36 twelve. 182 80 158 a hundred twenty five 263 twenty five.8 10000 30000 36
ZWBPD571571-64 twelve. 102 90 89 a hundred twenty five 308 thirty.two 53.three ten thousand 30000 sixty four 28.two
ZWBPD571571-96 twelve. sixty eight 90 fifty nine one hundred twenty five 462 45.3 10000 30000 96
ZWBPD571571-one hundred forty four 12. 45 ninety 39 125 693 67.nine 10000 30000 144
ZWBPD571571-216 12. 30 90 26 125 1039 one hundred and one.nine ten thousand 30000 216
ZWBPD571571-256 12. 24 ninety 22 130 923 ninety.6 58.six 10000 30000 256 33.5
ZWBPD571571-384 twelve. 16 ninety fifteen a hundred thirty 1385 136 10000 30000 384
ZWBPD571571-576 twelve. eleven ninety 10 a hundred thirty 2078 204 ten thousand 30000 576
ZWBPD571571-864 12. seven 90 seven a hundred thirty 3116 306 10000 30000 864
ZWBPD571571-1296 12. five 90 4 one hundred thirty 4675 458 10000 30000 1296

previously mentioned specifications just for reference and customizable in accordance to specifications.

2d Drawing:

Product details show:

Software

Audio and visual equipments

notebook Laptop, camcorder, automobile DVD, kinescope DVD, vehicle CD player, digicam, EPT digital camera, headphone stereo, cassette EPT recorder and and many others.

EPT application

electric powered shaver, tooth brush, kitchen EPTs, hair clipper, sewing EPTs, massager, vibrator, hair dryer, rubdown EPT, corn popper, scissor hair EPT, EPT cleaner, XiHu (West Lake) Dis.Hu (West Lake) Dis.den tool, sanitary ware, window curtain, coffee EPT, whisk and and so forth.

Place of work EPT equipments

CD-ROM, OA equipments, scanners, printers, multifunction EPTs copy EPTs, fax, FAX paper cutter, pc peripheral, lender EPT and and many others.

EPTmotive items

conditioning damper actuator, doorway lock actuator, retractable rearview mirror, meters, optic aXiHu (West Lake) Dis.s manage unit, head ligEPT beam degree adjuster, vehicle water pump, auto antenna, lumbar help, automatic vending EPT and etc.

ToEPTand versions

radio control design, automatic cruise handle, ride-on toy and and many others.

Health-related application

blood force meter, breath EPT and and many others.

EPTs

air freshener, display, circulation manage valves and and so on.

Electric powered EPT instruments

electrical drill, screwEPTr and and many others.

EPT devices

monitor, optics instruments and and so on.

Our Services:

  • ODM amp OEM
  • EPT layout and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment
  • Related EPT assistance

EPT amp EPT

one) EPT Information

packed in EPT first of all, then carton, and then strengthened with wood situation for outer EPT.
Or according to client’s need.

two) EPT Particulars

samples will be transported within ten times
batch orEPTleading time according to the true scenario.

Firm Data:

HangEPT EPT EPTry amp Electronics Co., Ltd was estabEPTd in 2001,We supply the total EPT answer for clients from design and style, tooling fabrication, components manufacturing and assembly.

1) Aggressive Advantages

  • one) Competitive Advantages
    19 calendar year experience in producing motor EPT
    We supply complex assist from r ampd, prototype, testing, assembly and serial generation , ODM ampOEM
    Competitive Price tag
    Item Efficiency: Low sound, Substantial efficiency, EPT lifespan
    Prompt Shipping: 15 doing work daEPTafter payment
    Modest Orders Approved

two) Principal EPT

  • EPT reduction EPT and its diameter:3.4mm-38mm,voltage:one.five-24V,EPT: .01-40W,output velocity:five-2000rpm and output torque:1. gf.cm -50kgf.cm,

  • Custom-made worm and EPT EPT EPTry
  • Specific EPT motion module
  • Precise component and assembly of plastic and metallic powEPTEPT.

Certifications

We Have passed to hold ISO9001:2015(CN11/3571),ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) and IATF16949:2016(CN11/3571.01).

and far more…

FAQ

1. Can you make the EPT with personalized specs?
Of course. We have layout and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment group, also a excellent time period of engineers, each of them have
numerous function many years expertise.

two.Do you supply the samples?
Indeed. Our business can supply the samples to you, and the supply time is about five-15daEPTaccording to the specification of EPT you require.

3.What is your MOQ?
Our MOQ is 2000pcs. But at the commencing of our company, we acknowledge little get.

4. Do you have the merchandise in inventory?
I am sorry we donot have the product in inventory, All goods are made with orders.

5. Do you give EPT support?
Of course. Our organization have layout and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment staff, we can give EPT help if you
need to have.

six.How to ship to us?
We will ship the goods to you according to the DHL or UPS or FEDEX and so on account you supply.

seven.How to shell out the funds?
We settle for T/T EPT. Also we have different bank account for receiving funds, like US dollors or RMB and so on.

8. How can I know the product is appropriate for me?
Frist, you require to offer us the much more particulars details about the solution. We will recommend the item to you according to your need of specification. Right after you confirm, we will prepare the samples to you. also we will offer some good EPTs according to your product use.

nine. Can I occur to your firm to visit?
Sure, you can come to our firm to pay a visit to at anytime, and welcome to check out our firm.

ten. How do get in touch with us ?
You should deliver an inquiry .

  in Krasnoyarsk Russian Federation  sales   price   shop   near me   near me shop   factory   supplier DC Brush   Brushless Reduction Precision Planetary Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Krasnoyarsk Russian Federation  sales   price   shop   near me   near me shop   factory   supplier DC Brush   Brushless Reduction Precision Planetary Gear Motor manufacturer   best   Cost   Custom   Cheap   wholesaler